Petrochemicals are used in the manufacture of________
Petrochemicals used manufacture plastics synthetic fibres, chemical industry products.
Ref: NCERT Class XI Geography — Fundamentals of Physical Geography, Savindra Singh
35 public questions tagged with this topic.
Petrochemicals used manufacture plastics synthetic fibres, chemical industry products.
Ref: NCERT Class XI Geography — Fundamentals of Physical Geography, Savindra Singh
point defect correct as per chemistry principle.
Ref: NCERT Chemistry Class XII — The Solid State
Orthorhombic a≠b≠c α=β=γ=90°.
Ref: NCERT Chemistry Class XII — The Solid State
**Number of carriers** from doping: Ge crystal 4×10²⁸ atoms/m³ doped 2 ppm trivalent gives acceptor atoms 8×10²² m⁻³, holes ≈ that, for 1.5 ppm 6×10²² m⁻³, for 0.5 ppm pentavalent Si 5×10²⁸ atoms/m³ gives 2.5×10²² donors/m³. Acceptor atom effectively negative when accepts electron, donor positive when donates, but crystal neutral. Trivalent dopants (valency 3) like Boron (B), Aluminium (Al), and Indium (In) are used in p-type semiconductors to create holes. Phosphorus (P) is pentavalent. Substituting values gives Aluminium, which matches expected behaviour for this semiconductor device configu
Ref: NCERT > Physics Book > Electronic Devices > Doping, Charge Carriers and Conductivity
**Energy bands in semiconductors** consist of valence band filled at 0 K and conduction band empty, gap E_g small ~1 eV (Si 1.1 eV, Ge 0.7 eV), insulators large gap >3 eV (C diamond 5.4 eV), conductors overlapping. Intrinsic semiconductor at 0 K behaves as insulator because no thermal excitation, at T>0 K electrons jump to conduction band leaving holes, conductivity increases with temperature. Elemental semiconductors are pure elements like Si and Ge, while compound semiconductors (e.g., GaAs, CdS) consist of multiple elements. Among the options, Ge is elemental. Substituting values gives Ge,
Ref: NCERT > Physics Book > Electronic Devices > Semiconductors, Types and Energy Bands
**Semiconductor properties** distinguish from conductors and insulators by temperature dependence and doping response. At 0 K intrinsic acts as insulator, conductivity due to thermally generated electron-hole pairs, number of outer electrons 4 for Si/Ge forming covalent bonds, each atom shares electrons, crystal with N atoms has 4N valence electrons, 2N bonds. Resistivity ( rho ) distinguishes materials: metals have low resistivity ( 10⁻² to 10⁻⁸ Ω m ), semiconductors intermediate ( 10⁻⁵ to 10⁶ Ω m ), and insulators high ( 10¹⁰ to 10¹⁹ Ω m ). Among the options, insulators have the highest resi
Ref: NCERT > Physics Book > Electronic Devices > Semiconductors, Types and Energy Bands
**Energy bands in semiconductors** consist of valence band filled at 0 K and conduction band empty, gap E_g small ~1 eV (Si 1.1 eV, Ge 0.7 eV), insulators large gap >3 eV (C diamond 5.4 eV), conductors overlapping. Intrinsic semiconductor at 0 K behaves as insulator because no thermal excitation, at T>0 K electrons jump to conduction band leaving holes, conductivity increases with temperature. Compound semiconductors include inorganic materials like CdS, GaAs, and InP, unlike elemental semiconductors (Si, Ge). Among the options, GaAs is a compound semiconductor. Substituting values gives GaAs,
Ref: NCERT > Physics Book > Electronic Devices > Semiconductors, Types and Energy Bands
**Ferromagnetism** shows large positive χ ≈ 10³ to 10⁵, strong attraction, domain structure with spontaneous magnetization, hysteresis, retentivity. Distinction based on sign and magnitude of χ and behaviour in non-uniform field, explaining attraction versus repulsion. Paramagnetic materials weakly enhance the magnetic field inside them because their atomic magnetic moments partially align with the external field, producing a small positive magnetization that adds to the applied field. Substituting values gives Weak alignment of atomic moments, which matches expected magnitude for this magneti
Ref: NCERT > Physics Book > Magnetism and Matter > Diamagnetism, Paramagnetism and Ferromagnetism
**Magnetic field of bar magnet** follows inverse cube law B ∝ m/r³, unlike inverse square for electric dipole. Given B at distance r, moment m = B r³/(μ₀/4π) for equatorial, m = B r³/(2·μ₀/4π) for axial, enabling moment extraction from measured field. Diamagnetic materials exhibit weak repulsion from a magnetic field because an external field induces small currents in their atoms that generate an opposing magnetic moment, per Lenz’s law, resulting in a slight reduction of the field inside the material. Substituting values gives Induced opposing moments, which matches expected magnitude for thi
Ref: NCERT > Physics Book > Magnetism and Matter > Magnetic Field Due to Bar Magnet - Axial and Equatorial
Given: A brass wire of length 2.2 m and cross-sectional area 2 × 10â»â¶ m² is stretched by a force of 220 N . If the Young's modulus of brass is 9 × 10¹ⰠN/m², what is the stress? These values define the system as per NCERT data. Formula: Stress: Stress = F/A = frac2202 × 10â»â¶= 1.1 × 10⸠N/m² .. This is the standard NCERT relation for this phenomenon. Substitution & Calculation: Substituting values like 1.2 × 10â»âµ, 236 J kgâ»Â¹ Kâ»Â¹, CH₃CHâ‚‚NHâ‚‚ etc. into the formula and simplifying step by step. Result: The computed value matches the expected outco
Ref: NCERT Physics Textbook for Class XI and XII, Chapter: Laws of Motion, Work Energy Power, Gravitation and System of Particles, Topic: Newton's laws, work-energy theorem and rotational dynamics.
Given: A conductor has a resistivity of 1.0 × 10â»â·Î© m and α = 4 × 10â»Â³Â°C^{-1 at 25° C . What is its resistivity at 85° C ? These values define the system as per NCERT data. Formula: Use: rho_t = rho_0 [1 + α (T - T_0)]. This is the standard NCERT relation for this phenomenon. Substitution & Calculation: Substitute: rho_t = 1.0 × 10â»â·[1 + 4 × 10â»Â³(85 - 25)] . Calculate: rho_t = 1.0 × 10â»â·[1 + 0.24] = 1.0 × 10â»â· × 1.24 = 1.24 × 10â»â·Î© m . Result: The computed value matches the expected outcome and confirms the correct choice. Units and power
Ref: NCERT Physics Textbook for Class XI and XII, Chapter: Current Electricity, Topic: Resistivity, temperature dependence and circuit analysis.
Given: An aluminium block of dimensions 0.4 m × 0.3 m × 0.1 m is subjected to a shearing force of 4 × 10â´ N . If the shear modulus of aluminium is 2.5 × 10¹ⰠN/m², what is the shear strain? These values define the system as per NCERT data. Formula: Shear modulus: G = fracShear stressShear strain. This is the standard NCERT relation for this phenomenon. Substitution & Calculation: Shear stress: Shear stress = F/A, A = 0.4 × 0.3 = 0.12 m² . Shear stress: 4 × 10â´/0.12 approx 3.33 × 10âµ N/m² . Shear strain: Shear strain = fracShear stressG = frac3.33 × 10âµÂ².5 × 1
Ref: NCERT Physics Textbook for Class XI and XII, Chapter: Laws of Motion, Work Energy Power, Gravitation and System of Particles, Topic: Newton's laws, work-energy theorem and rotational dynamics.
Add the app to your home screen for faster access.