Skip to content

#Ampere's law

17 public questions tagged with this topic.

What is the role of displacement current in Maxwell's generalization of Ampere's law?

**Hertz experiment** used induction coil connected to two rods with gap, spark produced oscillating charge, emitted EM wave, received by loop with gap sparking when E induced, measured wavelength by standing wave, demonstrated EM wave properties, validating Maxwell. Maxwell introduced displacement current to account for the magnetic field produced by a time-varying electric field, ensuring consistency in Ampere's circuital law when applied to capacitors. Using c = fλ, E₀/B₀ = c, I_d = ε₀ dΦ_E/dt, and spectrum classification λ = c/f, evaluation yields It produces a magnetic field due to a chang

Ref: NCERT > Physics Book > Electromagnetic Waves > Production of EM Waves and Hertz Experiment

What role does the displacement current play in a region where there is no conduction current?

**Hertz experiment** produced radio waves using spark gap LC oscillator, detected with loop antenna, confirming Maxwell's prediction, frequency ≈10⁸ Hz, wavelength ≈3 m, demonstrating EM waves travel at c, transverse, can be reflected, refracted, polarized. The document explains that in regions with no conduction current but a time-varying electric field, displacement current acts as a source of magnetic field, enabling electromagnetic wave propagation. Using c = fλ, E₀/B₀ = c, I_d = ε₀ dΦ_E/dt, and spectrum classification λ = c/f, evaluation yields It acts as a source of magnetic field, illus

Ref: NCERT > Physics Book > Electromagnetic Waves > Electromagnetic Spectrum - Radio Waves and Microwaves

What does the introduction of displacement current by Maxwell explain about electromagnetic phenomena?

**EM wave in vacuum** transverse, E and B perpendicular to propagation and to each other, E×B along propagation, in phase, E/B = c =3×10⁸ m/s, c =1/√(μ₀ ε₀), μ₀=4π×10⁻⁷ H/m, ε₀=8.85×10⁻¹² F/m. For E₀=45 V/m, B₀=E₀/c=45/3×10⁸=1.5×10⁻⁷ T=150 nT, illustrating B much smaller than E. The document explains that displacement current explains the generation of magnetic fields by time-varying electric fields, crucial for the propagation of electromagnetic waves and consistency in Ampere's law. Using c = fλ, E₀/B₀ = c, I_d = ε₀ dΦ_E/dt, and spectrum classification λ = c/f, evaluation yields Generation o

Ref: NCERT > Physics Book > Electromagnetic Waves > EM Wave Characteristics - Transverse Nature and E/B Ratio

Two parallel wires \( 0.08 \, \text{m} \) apart carry currents of \( 5 \, \text{A} \) and \( 3 \, \text{A} \) in the sam

**Magnetic moment of loop** m = N I A (A·m²), potential energy U = -m·B = -N I A B cosθ, torque tends to align m with B. For square side 0.18 m, A = 0.0324 m², N=30, I=2 A, B=0.4 T, θ=60°, τ =30×2×0.0324×0.4×sin60° =0.7776×0.866=0.673 N·m, illustrating large torque for modest parameters. Force per unit length f = (μ₀ I₁ I₂/2 π d) . f = (4 π × 10⁻⁷ × 5 × 3/2 π × 0.08) = (60 × 10⁻⁷/0.16) = 3.75 × 10⁻⁶ N/m . Using F = q v B sinθ, F = I l B sinθ, B = μ₀ I/(2π

Ref: NCERT > Physics Book > Moving Charge and Magnetism > Torque on Current Loop, Magnetic Moment and Galvanometer

A long wire carries \( 15 \, \text{A} \). At what distance is the magnetic field \( 3 \times 10^{-6} \, \text{T} \)? (\(

**Magnetic moment of loop** m = N I A (A·m²), potential energy U = -m·B = -N I A B cosθ, torque tends to align m with B. For square side 0.18 m, A = 0.0324 m², N=30, I=2 A, B=0.4 T, θ=60°, τ =30×2×0.0324×0.4×sin60° =0.7776×0.866=0.673 N·m, illustrating large torque for modest parameters. B = (μ₀ I/2 π r) , so r = (μ₀ I/2 π B) . r = (4 π × 10⁻⁷ × 15/2 π × 3 × 10⁻⁶) = (60 × 10⁻⁷/6 × 10⁻⁶) = 1 m . Using F = q v B sinθ, F = I l B sinθ, B

Ref: NCERT > Physics Book > Moving Charge and Magnetism > Torque on Current Loop, Magnetic Moment and Galvanometer

A long wire carries \( 14 \, \text{A} \). At what distance is the magnetic field \( 7 \times 10^{-6} \, \text{T} \)? (\(

**SI unit of magnetic field** is tesla (T), defined as force 1 N on 1 A·m wire perpendicular to field. Moving coil galvanometer uses torque τ = N I A B balanced by spring torque k φ, so deflection φ ∝ I, enabling current measurement, with radial field ensuring τ = N I A B always maximum. B = (μ₀ I/2 π r) , so r = (μ₀ I/2 π B) . r = (4 π × 10⁻⁷ × 14/2 π × 7 × 10⁻⁶) = (56 × 10⁻⁷/14 × 10⁻⁶) = 0.4 m . Using F = q v B sinθ, F = I

Ref: NCERT > Physics Book > Moving Charge and Magnetism > Torque on Current Loop, Magnetic Moment and Galvanometer

Two parallel wires \( 0.11 \, \text{m} \) apart carry currents of \( 6 \, \text{A} \) and \( 2 \, \text{A} \) in the sam

**Force between parallel wires** per unit length is f = μ₀ I₁ I₂/(2π d), μ₀/2π = 2×10⁻⁷ T·m/A, d separation (m), attractive if currents same direction, repulsive if opposite. For I₁=5 A, I₂=7 A, d=0.04 m, f = 2×10⁻⁷×35/0.04 = 1.75×10⁻⁴ N/m, sign indicates repulsion for opposite directions. Force per unit length f = (μ₀ I₁ I₂/2 π d) . f = (4 π × 10⁻⁷ × 6 × 2/2 π × 0.11) = (48 × 10⁻⁷/0.22) = 2.18 × 10⁻⁶ N/m . Using F = q v B sinθ, F = I l B sinθ, B = μ₀ I/(2π r), B = μ₀ N

Ref: NCERT > Physics Book > Moving Charge and Magnetism > Force on Current-Carrying Conductor and Between Parallel Wires

Two parallel wires \( 0.07 \, \text{m} \) apart carry currents of \( 9 \, \text{A} \) and \( 2 \, \text{A} \) in the sam

**Force between parallel wires** per unit length is f = μ₀ I₁ I₂/(2π d), μ₀/2π = 2×10⁻⁷ T·m/A, d separation (m), attractive if currents same direction, repulsive if opposite. For I₁=5 A, I₂=7 A, d=0.04 m, f = 2×10⁻⁷×35/0.04 = 1.75×10⁻⁴ N/m, sign indicates repulsion for opposite directions. Force per unit length f = (μ₀ I₁ I₂/2 π d) . f = (4 π × 10⁻⁷ × 9 × 2/2 π × 0.07) = (72 × 10⁻⁷/0.14) = 5.14 × 10⁻⁶ N/m . Using F = q v B sinθ, F = I l B sinθ, B = μ₀ I/(2π r), B = μ₀ N

Ref: NCERT > Physics Book > Moving Charge and Magnetism > Force on Current-Carrying Conductor and Between Parallel Wires